![]() Note: RouterOS 6.45.1 and firmware are required! The Serial Console cabling diagram for DB9 connectors is as follows: With the serial-terminal feature of the MikroTik, up to 132 (and, maybe, even more) devices can be monitored and controlled.Ī special null-modem cable should be used for connecting to the serial console from another computer. connection to a high-speed microwave modem that needed to be monitored and managed by a serial connection.monitoring weather-reporting equipment through a serial port.on a mountaintop, where a MikroTik wireless installation sits next to equipment (including switches and Cisco routers) that can not be managed in-band (by telnet through an IP network).Several customers have described situations where the Serial Terminal (managing side) feature would be useful: Note that a terminal emulation program (e.g., HyperTerminal on Windows or minicom on linux) is required to access the serial console from another computer. A special null-modem cable is needed to connect two hosts (like, two PCs, or two routers not modems). A free serial port can also be used to access other routers' (or other equipment, like switches) serial consoles from a MikroTik RouterOS router. The first serial port is configured as a serial console, but you can choose to unconfigure it to free it for other applications. If you do not plan to use a serial port for accessing another device or for data connection through a modem, you can configure it as a serial console. ![]() The Serial Console feature is for configuring direct-access configuration facilities (monitor/keyboard and serial port) that are mostly used for initial or recovery configuration. The serial terminal may be used to monitor and configure many devices - including modems, network devices (including MikroTik routers), and any device that can be connected to a serial (asynchronous) port. The Serial Console and Terminal are tools, used to communicate with devices and other systems that are interconnected via serial port. Sub-menu: /system console, /system serial-terminal ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |